Western Blocks for Manila Rope STEEL SHELL & WOOD SHELL

Blocks for Synthetic Fiber Rope with loose swivel hooks N-411B

Blocks for Synthetic Fiber Rope with loose swivel hooks• These blocks are built to carry the increased loads of synthetic fiber ropes• All hooks are heat-treated alloy steel.• You can now use a smaller size rope, and in turn, a smaller...

Loose Side Hooks with Latch for Manila Rope HS-262 Double, HA-261, 262, 263

Loose Side Hooks with Latch for Manila Rope• Laser cut side plates• Grade 5 bolts secured with lock washers and staked nuts.• Bronze bushed sheaves with larger bearing diameter for extended block life.  

HS-21-B Regular Wood Block for Manila Rope

Regular Wood Blocks for Manila RopeHS-21B, 22B, 23BHS-21B, 22B, 23B• Laser cut side plates• Grade 5 bolts secured with lock washers and staked nuts.• Bronze bushed sheaves with larger bearing diameter for extended block life.• Beckets...

S-603S Hinged Lead Block

Hinged Lead Blocks• Base plates are not drilled.• Available painted or galvanized.• Self-lubricated Bronze Bearings.  

S-602S / G-602S Flag Blocks

Flag Blocks• Base plates are drilled.• Available painted or galvanized.• Fitted with steel sheaves.• Self-lubricated Bronze Bushed  

G-601S Vertical Lead Block

Available painted or galvanized.• Fitted with steel sheaves.• Self Lubricated Bronze Bushed.  

S-600S Horizontal Lead Block

"• Available painted or galvanized.• Fitted with steel sheaves.• Self Lubricated Bronze Bushed."  

Western Cargo Hoisting Blocks E-566

Block is galvanized.• Blocks 14” and larger have flame-hardened roll forged sheaves that assuregreater wire life.• Roll forged sheave is fitted closely into mortise of shell so wire cannot jambetween sheave and shell.• Available for...

McKissick® Double Rig Trawl Blocks J452 Blocks

Double Rig Trawl Blocks• Steel sheave with flame hardened groove, for maximum wear under abrasive conditions.• Double row, permanently sealed tapered roller bearings.• Pressure lubrication throughout.• All steel construction.•...

McKissick® Try Net Blocks 453, 454

Forged steel swivel eyes.• Hot Dip galvanized.• 6” 453 - Pressed steel side plates with flared edges. Figure 8 grooved, self-lubricating bronze bushed sheaves, with pressure lube fittings.453 has an extra wide throat opening to allow...

Painter’s Supply Blocks for Manila Rope HS-130B, HS-135B, P-135B

Furnished in Bronze Bushed.• For 3/4” Manila Rope.• Steel Parts are Galvanized.• Furnished with Loose Side Hooks with Latch or Shackle.• Meets or exceeds all requirements of ASME B30.26 including identification, ductilit ,...

Gin Blocks for Manila Rope 350C, 350B, 350R

Gin Blocks for Manila RopePainter’s Supply Blocks for Manila RopeHS-130B, HS-135B, P-135BHS-130B, HS-135B, P-135B• For light hoisting by Roofers and Contractors.• Furnished with drop forged swivel latch hooks.  

Blocks for Synthetic Fiber Rope with loose swivel hooks N-411B, 412B, 413B

Blocks for Synthetic Fiber Rope with loose swivel hooks• These blocks are built to carry the increased loads of synthetic fiber ropes• All hooks are heat-treated alloy steel.• You can now use a smaller size rope, and in turn, a smaller...

Loose Side Hooks with Latch for Manila Rope HS-262 Double, HA-261, 262, 263

Loose Side Hooks with Latch for Manila Rope• Laser cut side plates• Grade 5 bolts secured with lock washers and staked nuts.• Bronze bushed sheaves with larger bearing diameter for extended block life.  

Steel Shell Blocks for Manila Rope P-301B, 302B, 303B

• Laser cut side plates• Grade 5 bolts secured with lock washers and staked nuts.• Bronze bushed sheaves with larger bearing diameter for extended block life.• New style hanger for fitting attachment    

Western Manila Rope Blocks HS-21B, 22B, 23B

Regular Wood Blocks for Manila RopeHS-21B, 22B, 23BHS-21B, 22B, 23B• Laser cut side plates• Grade 5 bolts secured with lock washers and staked nuts.• Bronze bushed sheaves with larger bearing diameter for extended block life.• Beckets...

380 SERIES

McKissick® Utility Crane Blocks 380 SERIES

L-1327 Eye Sling Hook

• Forged Alloy Steel - Quenched and Tempered.• Each hook has a Product Identification Code (PIC) for material traceabilit ,along with the size and the name Crosby.• 25% stronger than Grade 80.• Eye Sling hooks incorporate two types of...

A-1328 Eye Grab Hook

• Forged Alloy Steel - Quenched and Tempered.• Individually Proof Tested to 2-1/2 times the Working Load Limitwith certification• Each hook has a Product Identification Code (PIC) for materialtraceability, along with the size and the name...

A-1345N Master Link Assembly

• Alloy Steel - Quenched and Tempered.• Individually proof tested to values shown with certification• Proof tested with fixture sized to prevent localized point loading per ASTM A952.• Proof test certification shipped with each link...

A-1342N Master Link

• Alloy Steel - Quenched and Tempered.• Individually proof tested to values shown with certification• Proof tested with fixture sized to prevent localized point loading per ASTM A952.• Proof test certification shipped with each link...

LOK-A-LOY® 10 Alloy Connecting Link

• Suitable for use with both Grade 80 and Grade 100 chain.• Individually Proof Tested at 2-1/2 times Working Load Limit with certification.• Locking system that provides for simple assembly and disassembly - no specialtools needed.•...

Grade 100 Alloy Chain

• Alloy Steel.• Heat Treated.• 25% stronger than Grade 80 Alloy Chain.• Permanently embossed with CG (Crosby Group) and 10 (Grade).• Finish - Black rust preventative coating.• Proof Tested at 2 times the Working Load Limit...

A-1362 Crosby ELIMINATOR® Double Hook

The Crosby ELIMINATOR® combines selected features and functionality ofa master link, connecting link, grab hook and adjuster legs to provide youwith one fitting that is suitable for applications that require an adjustablelength chain sling.•...

A-1361 Crosby ELIMINATOR® Single Hook

The Crosby ELIMINATOR® combines selected features and functionality ofa master link, connecting link, grab hook and adjuster legs to provide youwith one fitting that is suitable for applications that require an adjustablelength chain sling.•...

HG-4060 / HG-4061 Lock Nuts

• End fittings are Quenched and Tempered or Normalized, bodies heat treated bynormalizing.• Complete assembly is self - colored.• Reference American Welding Society Specifications for proper welding procedures• Meets the performance...

HS-251 Stub End Turnbuckles

HS-251 Stub End Turnbuckles • End fittings are Quenched and Tempered or Normalized, bodies heat treated bynormalizing.• Complete assembly is self - colored.• Reference American Welding Society Specifications for proper welding...

HG-2510 BODY

Heat treat by normalizing.• Hot Dip galvanized.• UNC threads• Fatigue Rated.• Meets the performance requirements of Federal Specifications FF- -791b,Type 1, Form 1 - Class 2, except for those provisions required bythe contractor...

HG-4037 Jaw End Fittings

• Quenched and Tempered or Normalized.• Hot dip galvanized steel.• Forged jaw ends are fitted with bolts and nuts on sizes 1/4” through 5/8”, and pins and cotters on sizes 3/4” through 2-3/4”.• Modified UNJ...

HG-4037 Eye End Fittings

• Quenched and Tempered or Normalized.• Hot Dip galvanized steel.• Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimizestress in the eye. For turnbuckle sizes 1/4” through 2-1/2”,...

HG-4037 Hook End Fittings

• Quenched and Tempered or Normalized.• Hot Dip galvanized steel.• Hooks are forged with a greater cross sectional area that results in a stronger hook with better fatigueproperties.• Modified UNJ thread for improved fatigue...

HG-228 Jaw & Jaw

• End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.• Hot Dip galvanized steel.• TURNBUCKLES RECOMMENDED FOR STRAIGHT OR IN-LINE PULL ONLY.• Forged jaw ends are fitted with bolts and nuts for...

HG-227 Jaw & Eye

• End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.• Hot Dip galvanized steel.• Turnbuckles eyes are forged and elongated, by design, to maximize easy attachment in system andminimize stress in the...

HG-226 Eye & Eye

• End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.• Hot Dip galvanized steel.• Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimizestress in the eye...

HG-225 Hook & Eye

• End fittings are Quenched and Tempered or Normalized, bodies heat treated by normalizing.• Hot Dip galvanized steel.• Turnbuckle eyes are forged elongated, by design, to maximize easy attachment in system and minimizestress in the eye...

S-265 Weld-On Pivot Link

• Forged Steel — Quenched and Tempered.• Excellent welding qualities.• Widely used on farm machinery, trucks, steel hulled marine vesselsand material handling equipment.• Reference American Welding Society specifications for...

SL-150 METRIC SLIDE-LOC™ LIFT POINT

• Available in capacities from .5 to 3.2 metric tons.• Bail is Forged Alloy Steel – Quenched and Tempered.• Bail swivels 360° degrees.• Rated at 100% for 90 degree angle.• Fatigue rated to 20,000 cycles at 1-1/2 times...

SL-150 UNC SLIDE-LOC™ LIFT POINT

• Available in capacities from .5 to 3.2 metric tons.• Bail is Forged Alloy Steel – Quenched and Tempered.• Bail swivels 360° degrees.• Rated at 100% for 90 degree angle.• Fatigue rated to 20,000 cycles at 1-1/2 times...

HR-1200M Metric Side Pull Hoist Rings

• Wide range of capacities available:• 650 lbs. to 29,000 lbs.• Metric sizes from 0.3 tonnes to 13 tonnes.• Body components are Alloy Steel - Quenched and Tempered.• Rated at 100% of Working Load Limit for angles up to 90 degrees...

HR-1200 UNC Side Pull Hoist Rings

• Wide range of capacities available:• 650 lbs. to 29,000 lbs.• Metric sizes from 0.3 tonnes to 13 tonnes.• Body components are Alloy Steel - Quenched and Tempered.• Rated at 100% of Working Load Limit for angles up to 90 degrees...

HR-100 Pivot Hoist Rings Coil Threads

• Forged bail provides the following:• Easily readable raised lettering showing the nameCrosby or “CG” and PIC code for material traceability.• More durability provides the increased “Toughness”desired in...

SS-125M Metric Threads

• All components are 316 stainless steel, except bolt retainers, which are made from 15-7 PH (UNS 15700) magnetic stainless steel.• Available in capacities from 200 kg to 22.300 kg.• Rated at 100 percent at 90 degree angle.• Each...

SS-125UNC Threads

• All components are 316 stainless steel, except bolt retainers, which are made from 15-7 PH (UNS 15700) magnetic stainless steel.• Available in capacities from 400 lbs. to 50,000 lbs.• Rated at 100 percent at 90 degree angle.• Each...

HR-1000MCT Metric Threads

• All load bearing components are heat treated, Quenched & Tempered alloy steel.• All components, with the exception of the retaining ring, are produced with maximum material hardness of 34 HRc.All primary load bearing components have...

HR-1000CT UN Threads

• All load bearing components are heat treated, Quenched & Tempered alloy steel.• All components, with the exception of the retaining ring, are produced with maximum material hardness of 34 HRc.All primary load bearing components have...

HR-1000 UNC Threads

HR-1000 UNC Threads Forged bail provides the following:• Easily readable “Raised Lettering” showing the name Crosby or “CG” and PIC Code for material traceability.• Greater durability providing the increased...

HR-125M Metric Threads

• Top washer has the following features:• The Working Load Limit and Recommended Torque value are permanently stamped into each washer.• Washer is color coded for easy identification: Silver - Metric thread• Individually Proof Tested...

HR-125 UNC Threads

• Top washer has the following features:• The Working Load Limit and Recommended Torque value are permanently stamped into each washer.• Washer is color coded for easy identification: Red - UNC thread.• Individually Proof Tested to...

G-460 Soft Eye / G-461 Thimble Eye Bundle Cli

Each base and Bundle Clip adapter has a ProductIdentification Code (PIC) for material tracability, the nameCrosby or CG, and a size forged into it.• Entire clip galvanized to resist corrosive and rusting action.• Forged bases and bundle clip...

S-405 Lifting Eyes

Forged Steel — Quenched and Tempered.• On request: threaded to customer specification