Power and Motion Technology

IMPULSE®•Link Wireless Diagnostics System (WDS)

AC Drive Support Tools Magnetek Material Handling's IMPULSE•Link Wireless Diagnostics System (WDS) is a Windows-based, interactive drive software and hardware package that enhances productivity by...

Footbrake Static Stepless Simulation Software

AC Drive Support Tools Footbrake/Static Stepless Simulation software is designed for IMPULSE®•VG+ Series 4 drives used on traverse motions to provide an effective means to slow or stop the motion of...

Sway Control System (SCS®) Series 2

AC Drive Support Tools Sway Control System Series 2 improves productivity by allowing crane operators to concentrate on load engagement rather than minimizing load swing.

Bucket Control Software

AC Drive Support Tools Bucket Control custom software application will save you money by eliminating the need for a PLC or additional external logic.You will also save time when replacing wire ropes...

Weight Measurement System (WMS) Software

AC Drive Support Tools Weight Measurement System (WMS) combines the functions of Load Summing and Weight Measurement II in a convenient single custom software.WMS can be used with IMPULSE®•VG+...

IMPULSE® •VG+ Series 4

AC Drives IMPULSE drives are designed especially for material handling applications, providing a complete package of crane-specific capabilities far beyond a general purpose drive's functionality...

IMPULSE®•D+ HHP

AC Line Regenerative Control Systems The IMPULSE•D+ HHP is a modular, regenerative inverter platform designed with reliability and serviceability in mind. Magnetek’s high performance AC Line...

IMPULSE®•D+

AC Line Regenerative Control Systems The IMPULSE•D+ is a high-performance Active Front End regeneration unit in a chassis drive layout. Magnetek’s high performance AC Line Regenerative Systems are...

IMPULSE®•R+

AC Line Regenerative Control Systems The IMPULSE•R+ is designed to provide a low-cost solution to add line regeneration to your overhead crane. Magnetek’s high performance AC Line Regenerative...

HMPD Series w/Limit Switch - 250 lbs

Linear Actuators - 25 to 2,000 lb. HMPD-LS Series Actuator: Capacity: 250 lbs, Voltage: 12 VDC, Screw: Acme, Temperature Range: 25ºF to 120ºF, Envir. Rating: IP50 Protection (IP52 optional)

HMPB Series 250 lbs

Linear Actuators - 25 to 2,000 lb. TUBE RESTRAINING TORQUE: 30 in-lbf (3.4 Nm)SCREW TYPE: Acme ScrewTEMPERATURE RANGE: 25ºF to 120ºF (-4ºC to 50ºC) (Special low temperature grease...

HMPB Series 500 lbs

Linear Actuators - 25 to 2,000 lb. TUBE RESTRAINING TORQUE: 60 in-lbf (6.7 Nm)SCREW TYPE: Acme ScrewTEMPERATURE RANGE: 25ºF to 120ºF (-4ºC to 50ºC) (Special low temperature grease...

HSPB Series 250 lbs

Linear Actuators - 25 to 2,000 lb. TUBE RESTRAINING TORQUE: 30 in-lbf (3.4 Nm)SCREW TYPE: Acme ScrewTEMPERATURE RANGE: 25ºF to 120ºF (-4ºC to 50ºC) (Special low temperature grease...

XLT Series - 565 to 1015 lbs

Linear Actuators - 25 to 2,000 lb. VOLTAGE: 12 or 24 VDCSCREW TYPE: Ball ScrewSTROKES: 2 to 11.8 in (50 to 300 mm)TEMPERATURE RANGE: -13ºF to 150ºF (-25ºC to 65ºC)ENVIRONMENTAL RATING: IP66S...

LS Series - 450 to 675 lbs

Linear Actuators - 25 to 2,000 lb. SPEED: 0.15 to 0.26 in/s (3.8 to 6.6 mm/s)VOLTAGE: 12 VDC or 115 VACSTROKES: 4, 8, 12 and 24 in. (101, 203, 304 and 609 mm)

MPD Series - 500 lbs

Linear Actuators - 25 to 2,000 lb. TUBE RESTRAINING TORQUE: 60 in-lbf (6.7 Nm)SCREW TYPE: Acme ScrewTEMPERATURE RANGE: 25ºF to 120ºF (-4ºC to 50ºC) (Special low temperature grease...

TAC Series - 500 lbs

Linear Actuators - 25 to 2,000 lb. TUBE RESTRAINING TORQUE: 40 in-lbf (4.5 Nm)SCREW TYPE: Acme ScrewTEMPERATURE RANGE: 25ºF to 120ºF (-4ºC to 50ºC) (Special low temperature grease...

SPB Series - 500 lbs

Linear Actuators - 25 to 2,000 lb. TUBE RESTRAINING TORQUE: 60 in-lbf (6.7 Nm)SCREW TYPE: Acme ScrewTEMPERATURE RANGE: 25ºF to 120ºF (-4ºC to 50ºC) (Special low temperature grease...

CMLA A Series - 500 lbs

Linear Actuators - 25 to 2,000 lb. SCREW TYPE: Ball screw or trapezoidTEMPERATURE RANGE: -4ºF to 150ºF (-20ºC to 65ºC)ENVIRONMENT: IP66S protection standard

TAL Series - 1,000 lbs

Linear Actuators - 25 to 2,000 lb. TUBE RESTRAINING TORQUE: 80 in-lbf (9 Nm)SCREW TYPE: Acme ScrewTEMPERATURE RANGE: -20ºF to 120ºF (-29ºC to 50ºC) (Special low temperature grease...

SPA Series - 1,500 lbs

Linear Actuators - 25 to 2,000 lb. TUBE RESTRAINING TORQUE: 215 in-lbfSCREW TYPE: Acme ScrewTEMPERATURE RANGE: 15ºF to 120ºF ENVIRONMENTAL RATING: IP50 protection standard

SPA Series - 2,000 lbs

Linear Actuators - 25 to 2,000 lb. TUBE RESTRAINING TORQUE: 180 in-lbf (20.3 Nm)SCREW TYPE: Ball ScrewTEMPERATURE RANGE: 15ºF to 120ºF (-10ºC to 50ºC)ENVIRONMENTAL RATING: IP50 protection standard...

CMLA B Series - 1,000 lbs

Linear Actuators - 25 to 2,000 lb. SCREW TYPE: Ball screw or trapezoidal screwTEMPERATURE RANGE: -4ºF to 150ºF (-20ºC to 65ºC)ENVIRONMENTAL RATING: IP66S protection standard

CMLA C Series - 1,500 lbs

Linear Actuators - 25 to 2,000 lb. SCREW TYPE: Ball screw or trapezoidal screwTEMPERATURE RANGE: -4ºF to 150ºF (-20ºC to 65ºC)ENVIRONMENTAL RATING: IP66S protection standard

TMD02 Series - 250 lbs

Linear Actuators - 25 to 2,000 lb. VOLTAGE: 12 or 24 VDCSCREW TYPE: Acme ScrewTEMPERATURE RANGE: 25F to 120F (-4C to 50C)ENVIRONMENTAL RATING: IP50 protection standard

TMD01 Series - 100 lbs

Linear Actuators - 25 to 2,000 lb. VOLTAGE: 12 or 24 VDCSCREW TYPE: Acme ScrewTEMPERATURE RANGE: 25ºF to 120ºF (-4ºC to 50ºC)ENVIRONMENTAL RATING: IP50 protection standard

LT Series - 27 to 225 lbs

Linear Actuators - 25 to 2,000 lb. VOLTAGE: 12 or 24VDCSTROKES: 2 to 11.8 in (50 to 300 mm)TEMPERATURE RANGE: -13ºF to 150ºF (-25ºC to 65ºC)ENVIRONMENTAL RATING: IP66 protection

SCW05 Series - 5 Ton

SuperCylinders - 2 to 25 Ton SPEEDS: Up to 135.6 in/min (58 mm/s)BRAKE MOTOR: 230/460 VAC, 3 ph, 60 HzSTROKES: Up to 79 in (2,006 mm)TEMPERATURE RANGE: 0ºF to 120ºF (-18ºC to 50ºC)HAZARDOUS RATED...

SCW10 Series - 10 ton

SuperCylinders - 2 to 25 Ton SPEEDS: Up to 108 in/min (46 mm/s)BRAKE MOTOR: 230/460 VAC, 3 ph, 60 HzSTROKES: Up to 108 in (2,743 mm)TEMPERATURE RANGE: 0ºF to 120ºF (-18ºC to 50ºC)HAZARDOUS RATED...

SCW20 Series - 20 ton

SuperCylinders - 2 to 25 Ton SPEEDS: Up to 21.6 in/min (9 mm/s)BRAKE MOTOR: 230/460 VAC, 3 ph, 60 HzSTROKES: Up to 132 in (3,352 mm)TEMPERATURE RANGE: 0ºF to 120ºF (-18ºC to 50ºC)HAZARDOUS RATED...

SCW25 Series - 25 ton

SuperCylinders - 2 to 25 Ton SPEEDS: Up to 20.8 in/min (9 mm/s)BRAKE MOTOR: 230/460 VAC, 3 ph, 60 HzSTROKES: Up to 137 in (3,505 mm)TEMPERATURE RANGE: 0ºF to 120ºF (-18ºC to 50ºC)HAZARDOUS RATED...

SCW02 & 03 Series - 2 & 3 ton

SuperCylinders - 2 to 25 Ton SPEEDS: Up to 119 in/min (50 mm/s)BRAKE MOTOR: 230/460 VAC, 3 ph, 60 HzSTROKES: Up to 59 in (1,498 mm)TEMPERATURE RANGE: 0°F to 120°F (-18°C to 50°C)HAZARDOUS RATED...

SCN03 Series - 3 ton

SuperCylinders - 2 to 25 Ton SPEEDS: Up to 196.1 in/min (83 mm/s)BRAKE MOTOR: TEFC 230/460 VAC, 3ph, 60 HzSTROKES: Up to 61 in (1,549 mm)TEMPERATURE RANGE: 0ºF to 120ºF (-18ºC to 50ºC)HAZARDOUS...

SCD02, 03 & 06 Series - 3747 LB, 3789 LB & 3265 LB

SuperCylinders - 2 to 25 Ton SPEEDS: Up to 11.9 in/sec (302 mm/s)BRAKE MOTOR: 230/460 VAC, 3 ph, 60 HzSTROKES: Up to 36 in (914 mm)TEMPERATURE RANGE: 0ºF to 120ºF (-18ºC to 50ºC) FEATURES & B

Modular Actuators -Translating Machine Screw

Modular Actuators - 100 to 2,000 lb. Rated loads from 2,000 lbs, depends on actuator gear ratio & motor HPLifting speeds to 170 in/min (varies w/load & hp/rpm of motor)Standard travel up to 24...

Modular Actuators - Translating Ball Screw

Modular Actuators - 100 to 2,000 lb. Rated loads from 2,000 lbs, depends on actuator gear ratio & motor HPLifting speeds to 170 in/min (varies w/load & hp/rpm of motor)Standard travel up to 24...

Modular Actuators - Rotating Ball Screw

Modular Actuators - 100 to 2,000 lb. Rated loads from 2,000 lbs, depends on actuator gear ratio & motor HPLifting speeds to 170 in/min (varies w/load & hp/rpm of motor)Standard travel up to 24...

Modular Actuators - Rotating Machine Screw

Modular Actuators - 100 to 2,000 lb. Rated loads from 2,000 lbs, depends on actuator gear ratio & motor HPLifting speeds to 170 in/min (varies w/load & hp/rpm of motor)Standard travel up to 24...

PHOENIX Telescoping Lifting Column 1100 to 5600 lbs

Lifting Columns - Up to 5620 lb. Capacity CAPACITY: 1100 to 5600 lb (5 to 25 kN)DESIGN: Acme screw, ball screw, or AGS screwSPEED: up to 354 in/min (9 m/min)TRAVEL: Up to approximately 6 ft (2m)...

Positioning Control System

Positioning applications can be complicated and time consuming. We offer an adaptable range of options to precisely position single or multiple axes of motion.Locations can be easily entered with our...

Synchronization Control System

Duff-Norton's Synchronization controls provide an electrical solution to synchronizing actuators where mechanical shafting and coupling cannot be achieved. We offer synchronization controls for...

Digital Display Control System

Digital display controls are ideal for applications that require live positioning. A feedback device provides a signal to either a panel meter or human machine interface (HMI). The panel meter or HMI...

Three Phase Jog Control System

Duff-Norton three phase jog controls are designed to jog a wide range of standard three phase electric motors. Our standard three phase jog controls can be configured to jog motors at...

Single Phase Jog Control System

Duff-Norton offers single phase jogging control panels that meet a wide variety of single phase voltages.All of our control panels come standard with short circuit protection devices as well as...

Pendant Control System

Duff-Norton pendant controls provide ease of movement around applications. We offer an option of 3, 5, 7, and 9 button pendants. Each pendant control comes standard with an easily accessible...

Variable Speed Control System

Many applications require a variation of speeds during the motion process. Our Variable Speed Controller allows the speed pot to be adjusted between 0% and 100%, even while the application is in...

Custom Control System

No two applications are the same. We work closely to understand your application and provide the best possible solution. Control packages can be highly customized and we offer a wide variety of...

Intelli-Protect™ Systems

Intelli-Crane Protect personnel and improve facility throughput with Intelli-Protect™ Systems featuring no-fly zone technology.

AC Pre-Engineered Panels

AC Control Panels Magnetek's Pre-Engineered control panels feature all the components needed to provide complete control for the simplest of projects to the most complex. IMPULSE®•G+ Series 4,...

AC Engineered Panels

Combining Magnetek's extensive application experience and cutting-edge products, we provide the ultimate solutions for overhead motion control. Our pre-engineered, custo

Drive Synchronization Software

AC Drive Support Tools Need to synchronize multiple drives? Our IMPULSE® Drive Synchronization software makes it easy.

Dynamic Braking Resistors

AC Drive Support Tools Magnetek's Dynamic Braking Resistors are designed specifically for crane and hoist duty cycles and are paired with Magnetek drives based on your crane's CMAA duty cycle.

Shop by Brand

Power and Motion Technology

Magnetek

Magnetek

Magnetek

Magnetek

Magnetek

Magnetek

Magnetek

Magnetek

Magnetek

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton

Duff Norton