Product Description
CMLA A Series - 500 lbs
Linear Actuators - 25 to 2,000 lb.
SCREW TYPE: Ball screw or trapezoid
TEMPERATURE RANGE: -4ºF to 150ºF (-20ºC to 65ºC)
ENVIRONMENT: IP66S protection standard
SCREW TYPE: Ball screw or trapezoid
TEMPERATURE RANGE: -4ºF to 150ºF (-20ºC to 65ºC)
ENVIRONMENT: IP66S protection standard
Fully rated at 500 lbs to handle dynamic loads both in compression and tension
Up to 1.5 in/sec at rated load
3.9 in , 5.9 in, 11.8 in, 17.7 in, and 23.6 in
Safety clutch aids in the prevention of damage due to accidental overload conditions
Both ball and trapezoidal screw models available
115Vac or 230Vac single phase
Standard on ball screw models
Position feedback potentiometer
Adjustable limit switches
CMLA A Series 500 lb Product Specifications | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|
Capacitor Model | Motor | Max. Dynamic Load | Max. Static Load | Screw | Gear | Motor Power | Amperage | Lifting Speed | Duty Cycle | Capacitor Rating |
# | Type | (lbs) N | (lbs) N | Type | Ratio | Volts | Amps | (in/s) mm/s | (in/hr) m/hr | mdf |
SK6405-7-13 | AC | (500) 2200 | (750) 3336 | Trapezoid | 11.5 | 115 | 2.3 | (0.71) 18.0 | (810) 20.6 | 35 |
SK6405-7-10 | AC | (500) 2200 | (750) 3336 | Trapezoid | 11.5 | 230 | 1.4 | (0.71) 18.0 | (810) 20.6 | 10 |
SK6405-7-13 | AC | (500) 2200 | (750) 3336 | Ball | 6.5 | 115 | 2.4 | (1.5) 38.1 | (1200) 30.5 | 35 |
SK6405-7-10 | AC | (500) 2200 | (750) 3336 | Ball | 6.5 | 230 | 1.5 | (1.5) 38.1 | (1200) 30.5 | 10 |
Notes: 1. The correct capacitor mfd should be used for each model or the cylinder will not perform as rated. 2. Order Hard Start Kit 192036494 for applications where high starting torque is required (low temperature, high starting load) |
CMLA A Series 500 lb Dimensions
|
---|